Metal Water & Dust Eliminator

IP 64 Metal water eliminator

IP 64 Metal water eliminator


By definition the Eliminator should protect against water and dust which is achieved by the R17 filter pads and offer protection against low pressure jets of water from all directions. Limited ingress is permitted.









Protection against ingress of solid foreign objects.

IPnX: IP6X     Category 2     Test Duration:8 Hours

Protection against ingress of water with harmful effects indicated.

IPXn:IPX4   Flow Rate:10 Litres/Minute  Test Duration:5 Minutes

Results IP Value: IP64

 Tested by Cambridge Refrigeration Technology To BS EN 60529:1992



Casing:-2mm Pre-Galvanised Mild Steel , Aluminium, 304 Stainless or 316L.

Pre-Galvanised Mild Steel is used as Standard whilst thicker gauges can be used necessary to achieve the required specification. Fully welded casing with welds cleaned flush and dressed as necessary.

Blades:-  Specially designed ‘V’ Type arrangement

Flanges:- Self Flanged and undrilled as standard. RS angle flanges cleaned and primed painted, can be fitted.

Fingerguards:- 1/2”sq Mesh used as standard. Insect mesh is also Available.

Finish:-Powder coating on blades and casing available.

 Temperature:-    Standard RangeC (airflow based on clean filter media. See literaturefor filter media airflows)